LaserLiner CompactPlane-Laser 3D Manual De Instrucciones página 15

Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Technical data
Self-levelling range
Accuracy
Operating range (depending
on room illumination)
Laser wavelength
Laser class
Power supply
Operating time
with 3 laser levels
with 2 laser levels
with 1 laser level
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight (incl. batteries)
Subject to technical changes without notice. 18W10
EU directives and disposal
This device complies with all necessary standards for
the free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=complalas3
CompactPlane-Laser 3D
± 3.5°
± 0.35 mm / m
15 m
650 nm
2 / < 1 mW
4 x 1.5 V alkaline batteries (type AA, LR6)
approx. 6 hours
approx. 10 hours
approx. 25 hours
0°C ... +50°C, Max. humidity 80% rH,
no condensation, Max. working altitude
4000 m above sea level
-10 ... +70°C, Max. humidity 80% rH
85 x 122 x 132 mm
675 g
15
EN