General Safety Instructions - LaserLiner DigiLevel Laser G40 Manual De Instrucciones

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well
!
as the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed
on together with the device.
Function / application
Digital electronic spirit level with green laser technology
– Wall line laser to optically extend the measurement area
– Horizontal and vertical angle display
– The slope memory allows angles to be easily transferred

General safety instructions

– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions
fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying
glass, microscope, binoculars) be used to look at the laser beam
or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser
devices are in operation.
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014