General Safety Instructions - LaserLiner ThermoSpot Plus Manual De Instrucciones

Read the operating instructions and the enclosed brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain. This document must be kept in a safe place
and if the laser device is passed on, this document must be passed on with it.
Function / Application
The ThermoSpot Plus is an infrared thermometer with an adjustable emission coefficient that can be used
for measuring the temperature of a wide range of surfaces without having to make contact with them.
The instrument measures how much electromagnetic energy is emitted in the infrared wavelength range
and uses this information to calculate the surface temperature.

General safety instructions

– Attention: Do not look into the direct or
reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser
radiation, they should shut their eyes and
immediately move away from the beam.
1
2.
1.
06
GB
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2007-10
– Do not expose the device to mechanical stress,
extreme temperatures, moisture or significant
vibration.
– The device must only be used in accordance with
its intended purpose and within the scope of the
specifications. Modifications or changes to the
device are not permitted, this will otherwise
invalidate the approval and safety specifications.
2
Be sure to pay attention to polarity.
3
1.
2.