Publicidad
GB
1.8
Maintenance
Maintenance of the riveting tool is limited to the complete jaw mechanism and its
wearing parts:
•
Detach battery from riveting tool.
•
Unscrew steel head sleeve (No. 16) with WAF 27 open-ended spanner and clean.
Check for deposits in the tip of the steel head sleeve (No. 16).
•
Use WAF 17 open-ended spanner to release jaw housing (No. 17) from adapter (No. 24).
•
Remove jaws (No. 18/19), clean and oil sliding surfaces; replace if worn.
•
Re-assemble in reverse order ensuring that all parts are tightened!
Regular maintenance will extend the service life of your high-quality RIVIT tools which
should be serviced at least every 2 years by an authorised workshop or by RIVIT Ser-
vice. We recommend servicing tools that are subject to intensive use ahead of sched-
ule.
2.
Quick charger and battery
2.1
Technical data
2.1.1 Quick charger
Type:
12355/12356
Input voltage:
220-240 V~ / 50-60 Hz
Output voltage:
14.4 V
Output current:
1.5 A max.
Weight:
0.6 kg
2.1.2 Battery
Nominal voltage:
14.4 V
Number of cells:
4/8
Type of cells:
Li-Ion
Capacity:
1.3 Ah / 2.6 Ah
Weight:
0.35 kg / 0.5 kg
24
5 mm
BULB-TITE
®
/
17/32
17/29
SW 12
14.4 V
2.0 kg
20 mm
14.4 V
10,000 N
L
78.5 dB
pa
K=3dB
< 2.5 m/s²
K=1.5 m/s²
4 mm 5.2mm
6.3 mm
17/27
17/24
CN
189
Publicidad
Capítulos
