Publicidad
Idiomas disponibles
Idiomas disponibles
(01) Left Base
(02) Right Base
(03) Connector Frame
(04) Upright
(05) Left Top Frame
(06) Left arm frame
(07) Backrest frame
(08) Backing frame
(09) Wood base
(10) Top cable frame
(11) Left handlebar
(12) Right handlebar
(13) Sand bag upright
(14) Foot tube
(15) Right top frame
(16) Bottom Cable Frame
(17) Weight plate tube
(18) Wood ball
(19) Backplate
(20) Arm Pad
(21) Backrest Pad
(22) Comfort Grip
(23) D25*250 Form
(24) D25*300 Form
(25) D70*140 Form Roller
(26) Sleeve
(27) 38*38 plug
(28) 50*50 plug
(29) D25 Plug
(30) Pon-Pin
(31) 50*50 Foot end cap
(32) 50*50*D26 End cap
(33) M10*120 Hex bolt
(34) M10*105 Hex bolt
(35) M10*75 Hex bolt
(36) M10*70 Hex bolt
(37) M10*20 Hex bolt
(38) M8*65 Hex bolt
(39) M8*40 Hex bolt
(40) M8*20 Hex bolt
(41) M10*20 contersunk Bolt
(42) M6*20 contersunk Bolt
(43) D10 Washer
(44) D8 Washer
(45) M10 Nylon lock Nut
(46) Ball
(47) Speed ball base
(48) Right arm frame
(49) Boxing
(50) Floor to Ceiling Ball
(51) Snap Hook
2.- FITTING THE FOOTREST
SUPPORTS.-
Set the Foot End Cap (31) to the end
of the bases (1), (2) and (16).
Slide the Foam (24) onto the Backing
frame (8). Insert the Plug (29) into the
Backing frame (8).
Attach the Weight Plate Tube (17) to
the bases (1) and (2) using Bolts (41).
Insert the Plug (29) into the end.
Attach the Backing frame (8) to the
bases (1) and (2) using the Bolts (36)
with Washer (43) and nut (45). Fig.2
3.- FITTING THE UPPER &
LOWER CROSSBARS.-
Attach the upright and the Bottom
Cable Frame (4) and (16) to the base
(1) using Bolts (35) and Washer (43).
Then attach the Upright (4) to the
Backing frame (8) using Bolt (36) with
Washer (43), Nut (54).
Attach the other upright (4) to the base
(2) using the Backplate (19), Bolts (35)
with Washer (43) and nut (45). And to
the Backing frame (8) using the Bolt
(36) Washer (43) and nut (45).
Attach the Connector Frame (3) to the
upright (4) using Bolts (36) with
Washer (43) and nut (45). Fig.2
4.- FITTING THE UPPER
SUPPORTS.
Insert the Plug (29) into the end of
handlebars (11) and (12), and then
slide the Foam (23) onto them.
11
Publicidad
