Publicidad
Idiomas disponibles
Idiomas disponibles
Lock the Speed Ball Support Tube in
place by releasing the Spring Knob
and sliding the Speed Ball Support
Tube up or down slightly until the
Spring Knob "pops" down into the
locked position.
tighten the Spring Knob in a clockwise
direction. Fig.10.
INSPECTION & MAINTENANCE.-
Check and tighten all the parts on your
unit every three months. If you are
unsure about the condition of any part,
we recommend that you replace it with
For added safety,
original spare parts. The use of other
spare parts may cause injuries or
affect the performance of the machine.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
13
Publicidad
