Technical Data - Hotpoint Ariston HES 60 IX/HA Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Model with halogen light bulbs.
1.
Using a flat head screwdriver or equivalent tool, carefully pry loose the light
cover.
2.
Remove the damaged light and replace with a new 12 Volt, 20 Watt
(Maximum) halogen light made for a G-4 base SUITABLE FOR USE IN
OPEN LUMINAIRES. Follow package directions and do not touch new light
with bare hands.
3.
Reinstall the light cover. (it will snap shut).
DISPOSAL
This appliance is marked according to the European directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product.
The symbol
on the product, or on the documents accompanying the
product, indicates that this appliance may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance
with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local authority.
MALFUNCTIONS
If something appears not to be working properly, do the following simple checks
before calling Technical Service:
If the hood is not working:
Check that:
- The power has not been disconnected.
- A speed has been selected.
If the hood performs inefficiently:
Check that:
- The motor speed selected is sufficient for the amount of smoke and
vapours released.
- The kitchen is sufficiently ventilated to allow air intake.
- The charcoal filter is not worn (hood in filtering version).
If the hood has turned off during normal functioning:
Check that:
- The power has not been disconnected.
- the omnipolar disconnection device has not tripped.
If the hood fails to operate correctly, briefly disconnect it from the mains power
supply for almost 5 sec. by pulling out the plug. Then plug it in again and try once
more before contacting the Technical Assistance Service.

TECHNICAL DATA

Model HES 60 IX/HA
Model HES 60 F IX/HA
Width 59,9 cm
Height 75,8-106,7 cm
Depth 50 cm
Total absorption 260 W
Motor absorption 1x180 W
Lamp absorption 2x40 W (E14)
Exhaust pipe Ø 15 cm
Model HES 70 IX/HA
Width 69,9 cm
Height 75,8-106,7 cm
Depth 50 cm
Total absorption 260 W
Motor absorption 1x180 W
Lamp absorption 2x40 W (E14)
Exhaust pipe Ø 15 cm
Model HES 90 IX/HA
Model HES 90 F IX/HA
Width 89,9 cm
Height 75,8-106,7 cm
Depth 50 cm
Total absorption 260 W
Motor absorption 1x180 W
Lamp absorption 2x40 W (E14)
Exhaust pipe Ø 15 cm
Model HES 62 F IX/HA
Model HES 62 F (WH)/HA
Model HES 62 F (BK)/HA
Width 59,9 cm
Height 75,8-106,7 cm
Depth 50 cm
Total absorption 160 W
Motor absorption 1x120 W
Lamp absorption 2x20 W (G4)
Exhaust pipe Ø 15 cm
Model HES 92 F IX/HA
Model HES 92 F (WH)/HA
Model HES 92 F (BK)/HA
Width 89,9 cm
Height 75,8-106,7 cm
Depth 50 cm
Total absorption 160 W
Motor absorption 1x120 W
Lamp absorption 2x20 W (G4)
Exhaust pipe Ø 15 cm
Model HES 93 F IX/HA
Model HES 93 F WH/HA
Model HES 93 F BK/HA
Width 89,9 cm
Height 75,8-106,7 cm
Depth 50 cm
Total absorption 220 W
Motor absorption 1x180 W
Lamp absorption 2x20 W (G4)
Exhaust pipe Ø 15 cm
This appliance conforms to the following EEC Directive:
"Low Voltage Equipment" Directive 2006/95/EC (12-12-2006)
"Electromagnetic Compatibility" Directive 2004/108/EC (15-12-2004)
Components not provided with the product
EN
13

Publicidad

Tabla de contenido
loading

Tabla de contenido