D48
In the model Everest Visión the cleaning register is hidden under the door. To
cleaning it, the cover must be unscrewed and the register will appear (see
drawing D48).
9.5
EXTERNAL CLEANING
Do not clean the external surface of the insert with water or abrasive products
because they may damage the fireplace. Use a feather duster or a rag a bit
wet.
10. SEASONAL STOPPAGES
After cleaning the chimney and the insert by removing the ash and other residues, close all doors and regulators.
It is recommended to clean the chimney at least once a year. Meanwhile, check the joints because if they are not in good condition (they do
not adjust to the door), they do not guarantee the proper operation of the insert! For this reason, it would be necessary to change them. You
can find this spare part in the same Bronpi distributor where you bought your insert.
If there is humidity in the place where the fireplace is installed, put absorbent salts inside the equipment. Protect the internal parts with neutral
vaseline in order to keep the appearance along the time.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
42
INSERTS