Back Panel; Main Mix Output - LD Systems LD LAX16D Manual De Usuario

BACK PANEL:

44
PHANTOM Apparaten skall anslutas
till jordat uttag nar den
ansluts till ett natverk
ON OFF
AC INPUT
£
100-240V 50/60Hz Fuse:T1.6AL 250V
POWER CONSUMPTION: 40W
POWER
43 45
INSERTS (MONO CHANNELS)
38
All mono MIC channels are additionally equipped with Insert sockets (stereo jack, TRS), via which external
effects devices or the like can be patched into the respective channel. The signal is sent immediately after
the input gain control (TRIM) to an external signal processor, for example, a compressor or limiter. Once the
signal has passed through the external signal processor, it is returned to the same channel immediately
CTRL ROOM OUTPUT
39
These 6.3 mm sockets are used to send the signal to studio monitor speakers (CONTROL ROOM) or a PA
system.
ALT OUTPUT
40
These unbalanced 6.3 mm sockets serve as additional outputs. Their level is controlled using the ALT 3-4

MAIN MIX OUTPUT

41
The L/R MAIN MIX OUTPUT has both XLR and 6.3 mm TRS sockets via which the main mix output signal can
FOOT SW
42
This socket can be used to connect an external footswitch for activation/deactivation of the integral effects
processor (function identical with that of the DFX MUTE switch).
PHANTOM SWITCH
43
This switch activates the +48V phantom power for the four XLR microphone inputs.
Important: Make certain that the phantom power is off before connecting microphones.
POWER SWITCH
44
This switch is used to turn the mixer ON or OFF.
AC INPUT
45
This socket is used to connect the power adapter.
14
42
FOOT SW RIGHT LEFT
L
MAIN MIX OUTPUT(BAL/UNBAL)
R
OUTPUT
RIGHT LEFT
CTRL ROOM ALT OUTPUT
41 40
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD
- DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE
- NE PAS OUVRIR
LEFT(3) 8 7 6
INSERT INSERT INSERT
RIGHT(4)
39
CAUTION:
MODEL
REPLACE WITH THE SAME TYPE FUSE AND RATING
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
SERIAL
5 4 3 2
INSERT INSERT INSERT INSERT
38
1
INSERT