Maintenance; Cleaning; Technical Data; Accessories / Spare Parts - Velp Scientifica ECO 8 Manual De Instrucciones

4. Maintenance

No routine or extraordinary maintenance is necessary apart from periodically cleaning the unit as described in this manual.
In compliance with the product guarantee law, repairs to our units must be carried out in our factory, unless previously
agreed otherwise with local distributors. The instrument must be transported in its original packaging and any indications
present on the original packaging must be followed (e.g. palletized).
It is the responsibility of the user, to properly decontaminate the unit in case of hazardous substances remaining on the
surface or interior of the device. If in doubt about the compatibility of a cleaning or decontamination product, contact the
manufacturer or distributor.

4.1 Cleaning

Disconnect the unit from the power supply and use a cloth dampened with an non-inflammable non-aggressive detergent.

5. Technical data

Code Model
Admitted power supply
Power
Dimensions (WxHxD)
Weight
Holes and diameter
Construction material
Thermoregulation
Selectable temperatures
Selectable times
Set temperature reached
Count-down
End of cycle
Overtemperature
Heating block temperature stability and homogeneity
Temperature precision
Time to reach 150 °C
Enviromental ambient temperature
Storage temperature range
Max humidity
Pollution degree

6. Accessories / Spare parts

CA0091666 Test tube for sample decomposition 22 mm external diameter, NS 19/26 cone with glass cap (ECO 8)
CA0091667 Condenser 200 mm type KS with 3 meters polyethylene tube (ECO 8)
10000002 Absorption attachment for condenser (ECO 8)
A00001039 Test tube extractor (ECO 25)
CM0091680 Set of 20 glass test tubes with internal Ø 14 mm and external Ø 16 mm (ECO 8 and ECO 25)
CA0091636 Holder for 12 round glass cells (ECO 8 and ECO 25)
A00000362 Adapter x probe Ø3mm for DK/DKL/ECO
10000667 ECO 8 Retarded fuse 5x20 3A
10000670 ECO 25 Retarded fuse 5x20 8A
10000232 Foot
F101A0127 ECO 8
115 V - 230 V / 50–60 Hz
135 W
135x95x230 mm
2 Kg
8 (Ø16 mm) + 1 (Ø22 mm) 25 (Ø16 mm)
Epoxy painted aluminum cast
70 - 100 - 120 - 150 - 160 °C
30 - 60 - 120 min. - infinite
On the block at 200 °C
5 - 40 °C (41 - 104°F)
-10... + 60 °C (14 - 140°F)
6
F101A0125 ECO 25
115 V - 230 V / 50–60 Hz
400 W
155x95x275 mm
3,6 Kg
Pid microprocessor
Acoustic signal
Visual signal
Acoustic signal
± 0.5 °C
± 1.0 °C
12 min.
85%
2