Attaching Labels - Brother P-touch 1950 Guía De Usuario

LAMINATED TAPE
When you open the tape compartment cover of the machine, you will find a lettering stick in
the upper right hand corner. This stick enables you to easily remove the backing from labels
printed on laminated tapes, as shown below.
1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in
your right hand.
2 Pass the tape halfway through the long narrow hole in the stick.
3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as
shown below.
4 Peel off the label backing.
Some tapes can be folded in half so that the inside edges of the two backing pieces come off
the label, enabling the backing to be peeled off easily.
FABRIC TAPE
Fabric tape is used to attach a piece of fabric printed with your text onto garments using an
iron. After printing the text onto fabric tape and cutting off the label using scissors, place the
label on an ironed garment at the location where you wish to attach it in such a way that the
printed text can be read correctly. Cover the label with another piece of cloth and use an iron
set to a medium-high temperature (320 to 356 ˚F (160 to 180 ˚C)) and press down firmly for 15
to 30 seconds. For more details, refer to the instructions included with the fabric tape cassette.
6

ATTACHING LABELS