Frame Function - Brother P-touch 1950 Guía De Usuario

With the Frame function, you can choose from various frames and highlights to design a more
decorative or emphasized label.
The default setting is OFF; however, the following five settings are also available.
When any setting other than OFF is selected, the Frame indicator on the right side of the dis-
play comes on.
To change the frame setting:
1 While holding down c, press 6 once, and keep c held down to display the
current frame setting.
2 While still holding down c, continue pressing 6 until the desired frame setting is
displayed.

The Frame indicator comes on when any setting other than OFF is selected.
3 Release c to apply the selected frame setting to the entire text.
EXAMPLE
To select the candy frame setting:
1
While holding down
and keep
32

FRAME FUNCTION

c
, press
c
held down.
6
once,
F R A M E
O F F