Change The Calibration Factor - SKF LAGM 1000E Instrucciones De Uso

6.3.3 Change the calibration factor

Go to the calibration option in the menu (see 6.1)
to display and change the calibration factor.
Press ENTER (left button). The display shows the
current calibration factor:
The highlighted digit can be stepped up by pressing
STEP (right button):
To highlight the next digit, press ENTER (left button):
Continue to press STEP and ENTER to set the correct
calibration factor.
When the last digit has been accepted by pressing
ENTER, the display shows:
Press ENTER (left button) to accept and save the new
calibration or press CANCEL (right button) to cancel the
changes and return to the old calibration factor.
8 SKF LAGM 1000E