Descargar Imprimir esta página

Bosch BGL35 Serie Instrucciones De Uso página 7

Ocultar thumbs Ver también para BGL35 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
the power cord by the plug, pull out to the
length and insert the plug into the mains
switch the vacuum cleaner on or off, press the
button.
suction level can be in
by turning the control knob in the direction of
arrow.
power range
vacuuming delicate materials,
curtains, etc.
power range
the daily vacuuming of light
deposits.
power range
vacuuming durable floor coverings,
floors and heavily soiled surfaces.
tools are subject to a certain amount of wear,
on the type of hard floor you have (e.g.
rustic tiles). Therefore, you must check the
of the floor tool at regular intervals.
of floor tools may have sharp edges that
damage sensitive hard floors, such as parquet or
The manufacturer does not accept any
for damage
Set the adjustable floor tool:
and carpets
floors
you are vacuuming up relatively large particles, make
that you vacuum them up successively and
to ensure that the vacuum channel of the floor
does not become blocked. If necessary, you should
the nozzle in order to better vacuum up the dirt
the nozzles to the suction pipe or hand grip as
nozzle for vacuuming crevices and corners,
nozzle for vacuuming upholstered
curtains, etc.
tool
vacuuming hard floor coverings
parquet flooring, etc.)
(
the telescopic tube into the connecting piece
the hard floor tool until it locks in place.
(
release the connection, press the locking collar
pull out the telescopic tube.
adjusted to the level
by worn floor tools.
on model
the tool from below to clean it.
scissors to cut through threads and hairs wound
the rollers and then vacuum them away.
your appliance is equipped with a turbo brush,
the accompanying instruction manual for
on its use and maintenance.
can use the parking aid on the back of the vacuum
if you wish to stop vacuuming for a short time.
(
you have switched off the appliance, slide the
on the floor tool into the recess on the rear of
appliance.
overcome obstacles, e.g. steps, the appliance can
be carried by the handle on the appliance body.
out the mains plug.
pull on the power cord and then release it
power cord retracts automatically).
store
the appliance, you can use the
aid on the underside of the appliance.
the appliance upright on its end.
the hook on the floor tool into the recess on
underside of the appliance.
note:
switch off the appliance before
the
the dust bag change indicator in the lid is
yellow when the floor tool is lifted from
floor with the highest power setting selected, the
bag must be changed, even though it may not
be full.
if the dust bag is not full, it may still
changing, due to the type of dust which has
vacuumed.
check that the nozzle, suction pipe and fle
are not blocked, as this would also lead to the
bag change indicator being triggered.
(
hand grip can easily be detached from the hose
remove blockages.
the lid by pulling on the locking lever in the
of the arrow.
the lid in the direction of the arrow.

Publicidad

loading