Cleaning And Maintenance - Peg-Perego triplette sw Instrucciones De Uso

Ocultar thumbs Ver también para triplette sw:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
7 Lift the handlebar in the direction of the arrow (Fig. A). Press the handlebar downwards until
the final click (Fig. B).
8 Check that the opening is correct, as in the figure.
9 BASKET: fasten the basket on the chassis base, as shown in the figure, at six specific
points. Attach the four buttons, to the front and rear, as in figures A and B; then attach the
two Velcro strips to the chassis tube, as in figure C.
10 STEERING WHEEL: to guarantee good grip, the steering wheel may adopt four different
positions. To adjust them, press the button as in the figure.
11 STEERABLE WHEELS: the practical steering wheel allows you to steer the front wheels.
To steer, move the lever on the steering wheel to the right, as in figure A. To fix the wheels,
move the lever to the left, as in figure B.
12 WHEEL REMOVAL: press down on the lever at the centre of the wheel, as shown by the
arrow in figure A, and simultaneously pull the wheel towards you (Fig. B).
13 FOLDING: activate the brake and release the seats. To fold the chassis, lift the lever on the
handlebar (Fig. A), thus detaching the handlebar, and move it slightly forwards (Fig. B). Push
down on the safety lever with your left foot (Fig. C) to release the handlebar.
14 Rotate the handlebar downwards (Fig. A). Fold the chassis, attaching the tab to the
handlebar fastener (Fig. B).
GANCIOMATIC SYSTEM
Ganciomatic is a fast and practical system that allows you to attach the Primo Giro carrying
chair or the Primo Viaggio car seat (sold separately) to the Ganciomatic Base in one step.
Place the item on the Ganciomatic Base and push down with both hands until you hear a click.
Always activate the chassis or stroller brake before attaching or removing products (refer to
the respective instruction manuals).
Follow the instructions for the product combinations.
15 TRIPLETTE SW + 3 CARRYING SEATS
WARNING: To keep the product steady, we recommend installing all three carrying seats at
all times.
If for any reason Triplette SW is used with only one or two occupants, we recommend
fastening all three carrying seats securely to the chassis in any case.
Place the child or children in the seats nearest the steering wheel.
For instructions on attaching the product to the chassis and detaching it, see the instruction
manual supplied with the seat.
Figures A and B show two ways the seat can be fastened to the chassis.
16 TRIPLETTE SW + 3 PRIMO VIAGGIO CAR SEATS
Figure A shows how to attach the product (facing the person pushing).

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather: water, rain, or snow; prolonged and
continuous exposure to bright sunlight may give rise to colour changes of various different
materials; store this product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic parts with a damp cloth. Do not use
solvent or similar cleaning products; keep all metal parts dry to prevent rusting; keep moving

Publicidad

Tabla de contenido
loading

Tabla de contenido