Orbegozo VP 8500 Manual De Instrucciones página 15

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

VP 8500
9. And you can hold the iron in vertical position and press the steam trigger to iron hanging curtains
and clothes (jackets, suits, coats).
10. The iron has an anti-drip function. When the temperature is lower than the selected temperature,
no matter if press down the steam trigger or not, the iron will stop spraying steam automatically to
avoid water droplets coming out from the soleplate.
CLEANING AND MAINTENANCE
Before cleaning, firstly disconnect the power outlet and let the appliance cools down.
1. Wipe flakes and any other deposits on the soleplate with a damp cloth or a non-abrasive (liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the steam station iron and
the thermal insulating cushion with dry cloth.
3. When do not use the appliance for a long time, pour out the water in the tank, and store the iron on the
thermal insulating cushion.
4. Wind the iron cord and power cord around the cord winding groove and secure it by the cord clamps.
IRONING TIPS
-Always check first whether a label with ironing instructions is attached to the article. Follow these ironing
instructions in any case.
-The iron heats up quicker than cooling it down, therefore, you should start ironing the articles requiring
the lowest temperature such as those made of synthetic fiber.
-If the fabric consists of various kinds of fibers, you must always select the lowest ironing temperature to
iron the composition of those fibers.
-Silk and other fabrics that are likely to become shiny should be ironed on the inner side. -Velvet and other
textures that rapidly become shiny should be ironed in one direction with light pressure applied. Always
keeps the iron moving at any moment.
-Pure wool fabrics (100% wool) may be ironed with the steam iron. Preferably set temperature dial to the
maximum position and use a dry cloth as a mat.
- Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any such object.
NOTE: When ironing woolen fabrics, shining of the fabric may occur. So it is suggested that you should turn
the article inside out and iron the reverse side.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido