Abicor Binzel PP plus Manual De Instrucciones página 2

2
1
5
8
1 Mounting screw
potentiometer housing
(2 pcs)
2 Potientometer housing
Fig. 1
2
EN
3 Motor mounting screws
(3 pcs)
4 Bearing bushing
1 Unscrew mounting screws for potentiometer housing (1) and dismount
housing (2). Control leads do not have to be disconnected.
2 Unscrew mounting screws (5) and connection screw (8) on
handle shell (7). Dismount handle parts (6), (7).
3 Unscrew motor mounting screws (3) and pull off gear motor.
4 Disconnect motor control leads on gear motor and solder them to the
replacement motor.
NOTE
Ensure correct polarity (direction of rotation).
5 The bearing bushing (4) is only required for the Pittman motor version.
Mounting takes place in reverse order.
Conversion gear motor PP plus
3
7
5 Mounting screws
(4 pcs)
6 Handle shell
4
5
6
7 Handle shell
8 Connection screw
(1 pce)