(Wide Zoom Mode) - Sony PFM-510A2WU Manual De Instrucciones

3
Press ENT.
The original picture size and position are restored.
To cancel the reset function, press MENU before
pressing ENT.
Enlarging a 4:3 Image to a 16:9
Screen Naturally (Wide Zoom Mode)
When you ordinarily watch a 4:3 standard image in
the 16:9 screen, the image is seen distorted in a
horizontal direction due to the difference in
proportion. If you use wide zoom mode, the center of
the monitor will not be distorted as much and the
corners of the monitor will be distorted instead. You
can change the linearities by adjusting the H
LINEARITY and V LINEARITY settings.
The 4:3 standard image
1
In the PIC SIZE menu, press M/m to move the
cursor (B) to "ASPECT" and press ENT.
The following menu appears on the monitor
screen.
A S P E C T
The 4:3 image after setting
ASPECT to 16×9
The 4:3 image after setting
ASPECT to W ZOOM and
both linearities to standard
(00)
: 4 X 3
Resizing and Positioning the Picture
2
Press M/m to move the cursor (B) to "W ZOOM"
and press ENT.
The following menu appears on the monitor
screen.
A S P E C T
H L I N E A R I T Y
V L I N E A R I T Y
R E S E T
S E L E C T S E T
3
If you do not change H LINEARITY or V
LINEARITY, press ENT.
The menu returns to the PIC SIZE menu.
When you change H LINEARITY or V
LINEARITY, follow the steps below.
4
Press M/m to move the cursor (B) to "H
LINEARITY" or "V LINEARITY" and press
ENT.
H LINEARITY: to change the linearity in the
horizontal direction
V LINEARITY: to change the linearity in the
vertical direction
The following menu appears on the monitor
screen. (The illustration below is for selecting the
H LINEARITY.)
A S P E C T
H L I N E A R I T Y
5
Adjust the screen size with M/m.
To restore wide zoom mode items to their
original settings
In the ASPECT menu, select W ZOOM and press
ENT. Press M/m to move the cursor (B) to "RESET"
and press ENT. Then select YES with M/m and press
ENT.
: W Z O O M
: 0 0
: 0 0
ENTER E N D MENU
: W Z O O M
: 0 0
27
(GB)