dirna Bergstrom Bycool green line compact 2.0 Manual Del Usuario página 11

COMPACT 2.0
F4 Function: Automatic unit operation
The display will show
over 32ºC / 89ºF inside the vehicle, the blower and compressors will enter into maximum
performance for around 20 minutes when the unit is started up, subsequently regulating
performance capacity in line with the interior temperature.
Pressing or
59º and 80ºF.
F0 Function: Manual unit operation
This option allows users to select the comfort temperature and change the blower speed of
the unit manually.
Keeping pressed down increases the blower speed, displaying
Release the key at the required speed.
Keeping pressed down decreases the blower speed, displaying
U1
. Release the key at the required speed.
Pressing or
59º and 80ºF.
The compressors and the electro connect and disconnect automatically when the chosen
temperature is reached (E.g.: chosen temperature 23ºC / 73º F, the compressors and the
electro disconnect at 21ºC / 70ºF and connect again at 24ºC / 75ºF).
!
Important
In some cases of error messages, the On/off
goes off in order to turn off the unit.
!
Important
If the unit and the display shut down during operation, it may be due to the communication
cable or the power cable being disconnected or the power cable fuse having blown.
CA
alternating with the selected temperature. If the temperature is
chooses the required temperature, between 15º and 27ºC or between
chooses the required temperature, between 15º and 27ºC or between
Air conditioning for vehicles
key must be pressed down until the display
11
EN
U1 U2 U3 U4 U5
, , , ,
U5 U4 U3 U2
, , ,
.
,