Error Messages - dirna Bergstrom Bycool green line compact 2.0 Manual Del Usuario

COMPACT 2.0
EN
F1 Function: Digital thermometer module
The unit marks the temperature inside the vehicle. In this operation mode the unit is off.
F2 Function: Time programming
In function F2 , push key
1H to 9H , and then push the On/off
unit will work the selected time.
F6 Function: ºF Selection
To activate this function, keep the On/off
F6, and then release the key to directly enable ºF. To return to ºC, keep the
control panel pressed down with the display flashing
press the key on the control panel. The control is disabled when carrying out this
operation, meaning it must be registered again once finished.
!

Error messages

If the battery gives out continuous beeps when connected, the belt is disconnected or poorly
connected.
E0
- Recirculation gauge failure
E1
- Low battery
E2
- Blower or electrofan failure
E3
- Compressor failure
(Causes: motor, cabling, connector,
insufficient or excess load)
or from the display we choose the programmation time from
key and let go of in the wished option F4 / F0 . The
12
Air conditioning for vehicles
key pressed down until the display shows
C
, when it stops flashing,
E5
- Control module heating failure
E6
- Anti-ice gauge failure
E7
- Control module
(
communication failure)
Ec
- Communications cable failure
key on the