Before Use; Product Assembly; Operation; Cleaning And Maintenance - cecotec Ready Warm 7300 Quartz Sky Manual De Instrucciones

3. BEFORE USE

1. Take the product out of the box and remove all packaging materials.
2. Inspect the appliance for any visible damage, if it is observed, contact as soon as possible
the Technical Support Service of Cecotec for advice or reparation.
3. Place the heater on a flat and safe surface and make sure not to place under a power
socket.

4. PRODUCT ASSEMBLY

1. Remove the nuts form the base.
2. Pass the power cord through the base plate and
place it through the cable channel to ensure it is
properly secured.
3. Ensure that the base plate is firmly in position,
then gently screw the nuts in their correct place
and fix them firmly.

5. OPERATION

1. Insert the power cord into an earthed power outlet.
2. Turn on the power switch in order to activate the upper and middle heating ele-ments.

6. CLEANING AND MAINTENANCE

• Always turn off, unplug and allow the appliance to cool down before cleaning.
• Do not use abrasive scouring pads, powders or cleaners to clean the product.
• Use a soft, dampened and clean cloth to clean the product's outer housing. Be careful not
to touch the heating elements.
• If the heater is not going to be operated for a long period of time, store it in a dry and safe
place where it is protected from dust.

7. TECHNICAL SPECIFICATIONS

Model: Ready Warm 7300 Quartz Sky
Product reference: 05326
1200 W, 220-240 V~ 50/60 Hz
Made in China | Designed in Spain.
05326 Ready Warm 7300 Quartz Sky -manual- MV.indd 11
ENGLISH
READY WARM 7300 QUARTZ SKY 11
20/7/18 0:43