Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
MODE Button
To select Ω/Diode Test/Continuity/Capacitance, AC/DC Voltage, AC/DC Current
RANGE Button
When the meter is first turned on, it goes into the Autoranging mode.
This automatically selects the best range for the measurements being made
and is generally the best mode for most applications. For measurement
situations requiring that a range be manually selected, perform the following:
1. Press the RANGE button. The "AUTO" display indicator will turn off and
manual operation turn on.
2. Press the RANGE button to step through the available ranges until you select
the range you want.
3. Press and hold the RANGE button for 2 seconds to exit the Manual Ranging
mode and return to Autoranging.
REL Button
The relative function allows you to make continuous measurements relative to
a stored reference value. A reference voltage, current, etc. can be stored and
measurements made in comparison to that value. The displayed value is the
difference between the reference value and the measured value.
(Relative does not work in Frequency or Duty Cycle.)
1. Perform measurements as described in the operating instructions.
2. Press the REL button to store the reading in the display and the "REL"
indicator will appear on the display.
3. The display will now indicate the difference between the stored value
and the measured value.
4. Press the REL button to return to normal operation.
HZ% Button
The HZ% button is used to select frequency or % duty cycle in when in the
frequency, voltage or current function. When in the voltage or current function,
press the HZ% button to switch to frequency. The "Hz" symbol will appear on
the LCD display. Press the Hz% button a second time to switch to duty cycle.
The "%" symbol will appear on the display. Press the Hz% button again to
return to voltage or current readings.
HOLD Button
To freeze the reading on the LCD display, momentarily press the HOLD
5
Operation
The "HOLD" icon will be displayed on the LCD. Momentarily press the HOLD
button again to return to normal operation.
Backlight Button
The backlight illuminates the display when the ambient light is too low to permit
viewing of the displayed readings. To turn on the backlight, press the HOLD
button for > 1 second. The HOLD feature will activate when the backlight is turned
on. Momentarily, press the HOLD
press the HOLD
when the backlight is turned off. Momentarily, press the HOLD
Symbols and Annunciators
V
A
AC
DC
-
Ω
F
Hz
%
ºF
ºC
AUTO
HOLD
REL
n
µ
m
k
M
button.
OL
to exit HOLD. To turn the backlight off,
button for > 1 second. The HOLD feature will activate
Volts
Amps
Alternating current
Direct current
Display Minus sign
Ohms
Continuity
Diode test
Farads (capacitance)
Hertz (frequency)
Percent (duty cycle)
Degrees Fahrenheit
Degrees Centigrade
Autoranging
Display hold
Relative
Low Battery
nano (10
)
-9
micro (10
)
-6
milli (10
)
-3
kilo (10
)
3
mega (10
)
6
Overload
to exit HOLD.
6
Publicidad
Tabla de contenido
