Brightness Adjustment - Dörr DLP-600 LED Manual De Instrucciones

BRIGHTNESS ADJUSTMENT

Light intensity of the LEDs can be adjusted using the
brightness control (10).
• 5060 Lux at 1 m
• 1685 Lux at 2 m
• 722 Lux at 3 m
ADJUSTMENT OF ILLUMINATION ANGLE
Loosen the fi xing screws (6) und adjust the illumination
angle according to your needs.
USAGE OF THE REMOTE CONTROL
First, remove the battery protection foil. Press button a) to switch LED continuous LED light on.
Note: ON/OFF switch (13) must be in position "1"(ON). Use button b) to shut o the continuous
LED light. After use, please set the ON/OFF switch (13) to position"0" in order turn the conti-
nuous LED light totally o .
Using the buttons c) and d), you can control brightness (up or down).
MOUNTING THE FILTERS
The di usor fi lter and the orange fi lter are fi tted with magnetic
knobs. Place the desired fi lter onto the LED surface so that the
magnetic knobs will snap into the magnetic holders (3).
SPECIFICATIONS
Light Source 588 LEDs
Light Intensity max. 5060 Lux / 1m
Power Output 35.2 W
Colour Temperature 5600 K (3200 K with orange fi lters)
Operating Voltage DC 9 - 18 V
AC Adapter AC 100 - 240 V ~ 50/60 Hz 1.5 A DC 15 V
Measurements LED Light 31,5 x 27 x 4,5 cm (with metal frame)
lit surface: 23,5 x 16 cm
Measurements Light Stand transport height: 73 cm
height min./max.: 86 cm / 218 cm
Weight LED light: 1180 g (with metal frame)
light stand: 788 g
AC adapter: 452 g
Battery Type 2x Sony NP-F550
Operation Temperature -10° to 40° C
CONTENT OF SHIPMENT 2x LED Light with Barn Doors
2x Metal Frame
2x Light Stand
2x Di usor Filter white
2x Orange Filter
2x Remote Control incl. CR2025 cell
2x AC Adapter
1x Carrying Case
1x Manual
optional, available from DÖRR
WEEE INFORMATION
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is the European
community directive on waste electrical and electronic equipment, which became European
law in February 2003. The main purpose of this directive is to prevent electronic waste. Recy-
cling and other forms of waste recovery should be encouraged to reduce waste. The symbol
(trash can) on the product and on the packing means that used electrical and electronic
products should not be disposed of with general household waste. It is your responsibility to
dispose of all your electronic or electrical waste at designated collection points. Disposing of
this product correctly will help to save valuable resources and it is a signifi cant contribution
to protect our environment as well as human health. For more information about the correct
disposal of electrical and electronic equipment, recycling and collection points please contact
your local authorities, waste management companies, your retailer or the manufacturer of
this device.
RoHS CONFORMITY
This product is compliant with the European directive 2011/65/EU of June 08, 2011 for the
restriction of use of certain hazardous substances in electrical and electronic equipment
(RoHS) and its amendments.
CE MARKING
The CE marking complies with the European directives.
5