Before Starting The Appliance; Assembling The Food Processor; Fitting The Mixing Bowl; Fitting The Lid - Silvercrest KH 700 Instrucciones De Uso

• Use only the supplied original accessories since
these have been optimised for interaction with the
appliance.
• Do not operate the appliance without ingredients.
Overheating hazard!
Caution:
The blade z is very sharp! Exercise special care when
inserting and removing or cleaning the blade z!
Caution:
While the machine is in use, only put those ingre-
dients in the mixing bowl 9 or blender jug 4,
which are to be processed. Do not put hands and fo-
reign objects in the filling shaft q or blender jug 4
to avoid the risk of injury or damage to the machine.
• Do not attempt to open the lid 0 of the mixing
bowl 9 while in operation.

5. Before starting the appliance

• Before starting the device ensure that...
- the device and all accessories and the power plug
and the power cord are in perfect condition and...
– all packaging materials have been removed
from the appliance.
• Prior to initial use clean all device components as
described in the "Cleaning" chapter.
• Assemble the food processor and note that...
- The food processer is in a firm and stable posi-
tion. Secure the food processor on the working
surface with the four suction cups.
- the mixing bowl 9 works only when the cover
5 for the motor block 6, the mixing bowl 9
and the lid 0 for the mixing bowl 9 have
been properly fitted and engaged.
- the blender works only when the blender jug
4 and the blender lid 2 have been correctly
fitted and engaged.
- when blender jug 4, mixer lid 2, mixing bowl
9 and the lid 0 of the mixing bowl 9 have
been fitted, only the blender will work.

6. Assembling the food processor

6.1 Fitting the mixing bowl

6.2 Fitting the lid

Note:
Always ensure that the lid 0 is properly engaged
before switching on the appliance! Otherwise,
foodstuffs could be sprayed out during usage.
- 39 -
• Place the cover 5 on the motor
block 6 so that the arrow on
the cover 5 points towards the
open lock on the motor block
6. Turn the cover 5 anti-
clockwise until it is firmly seated.
The arrow now points towards
the closed lock.
• Position the mixing bowl 9
so that the arrow on the mi-
xing bowl 9 points towards
the open lock on the motor
block 6. Take hold of the mi-
xing bowl 9 with the handle
and turn it clockwise as far as
it will go. The arrow now po-
ints towards the closed lock.
• Fit the lid 0 on the mixing
bowl 9 so that the recesses
of the lid 0 match the slots of
the bowl 9. The marks on
the lid 0 and the bowl 9
must match.
• Turn the lid 0 clockwise until
you hear an impact. The lug
of the lid 0 now rests on the
handle of the mixing bowl 9.