is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2%
(select larger).
G.
Resistance to surrounding light: The deviation between the
value measured in the condition of man-made light or indoor
natural light and that of darkroom is less than ±1%.
H.
It is equipped with a function switch. The Oximeter can be
powered off in case no finger is the Oximeter within 5
seconds.
I.
Optical Sensor
Red light (wavelength is 660nm, 6.65mW)
Infrared (wavelength is 880nm,6.75mW)
5. Accessories
Hanging rope, pouch,silicone protector, user manual
6. Installation
6.1 View of the front panel
Fig. 2 Front view
EN