View Of The Front Panel - PULOX PO-900 Instrucciones Para El Usuario

(select larger).
F. Resistance to surrounding light
The deviation between the value measured in the condition of
man-made light or indoor natural light and that of darkroom is
less than ±1%.
G. Power supply requirement
Alternating current supply:100～240V AC 50/60Hz
Internal electrical power source:3.6 V DC ~4.2V DC.
H. Optical Sensor
Red light (wavelength is 660nm,6.65mW)
Infrared (wavelength is 905nm, 6.75mW)
I. Adjustable alarm range
SpO2: 0%~100%
Pulse Rate: 0bpm~254bpm
4.3 Environment Requirements
Storage Transportation Environment
a. Temperature :-40°C~60°C
b. Relative humidity :≤95%
c. Atmospheric pressure :500hPa~1060hPa
Operating Environment
a. Temperature:0°C~40°C
b. Relative Humidity :≤75%
c. Atmospheric pressure:700hPa~1060hPa
5. Installation

5.1 View of the Front Panel

Alternating current indicator light: the light is green when powered
on.
Probe jack: it is used to connect Oximeter probe to measure the
oxygen saturation,pulse rate and PI.
Figure 2 Front view
EN