The substitution of the damaged cable must be
done by the tech assistance service or by
competent authorized personnel with recognized
qualification.
When using electrical extensions, make sure that
these are compatible with the power cable and
that it does not touch liquids or conductive
surfaces.
Clean every part of the apparatus after using it;
empty the tanks, shake the filters and use humid
cloth over its surface before storing it.
Specialized personnel must always carry out
maintenance and repairs; any damaged part must
be substituted with original spare parts.
ATTENTION: it is forbidden to carry out changes
to the apparatus. Tampering could cause fires
and damages even lethal to the user and the
forfeiture of the guarantee.
The manufacturer declines any responsibility for
damages caused to people or things due to non-
compliance with these instructions or if the
apparatus is unreasonably used.
NOISE: Values measured according to EN 60704-1
(1997) / EN 60704-2-1 (2001) rules. Measurement A
for the sound pressure level of the machine is < 80
dB (A) Under unfavorable feed conditions, the
appliance may cause temporary drops in voltage.
Do not dispose of power tools into household waste!
According to the European Directive 2012/19/UE on
waste electrical and electronic equipment (WEEE)
and its incorporation into national law, power tools
that are no longer suitable for use must be
separately collected and sent for recovery in an
environmental- friendly manne.