PHE 75/PHE 80
Using the proper regulator according to outlet pressure of regulator as showed in the table above.
C. Table of injector
The hose and regulator assembly must conform to local standard codes
•
Regulator outlet pressure should meet the corresponding appliance category showed in the
•
specifications
The appliance requires approved hose in 0.5 m
•
ASSEMBLY PARTS
Tools needed:
Philips screwdriver w/ medium blade
Spray bottle of soap solution for leakage test
APPLIANCE CATEGORY:
TYPES OF GAS:
GAS PRESSURE:
TOTAL HEAT
INPUT (Hs): (Qn)
INJECTOR SIZE:
I3+(28-30/37)
Butane
Propane
28-30mbar
37 mbar
13 Kw (945g/h)
1.88 mm for main burner
0.18 mm for pilot burner
27