Symbols; General Instructions; Useful Advice; Use - Imetec L7501 Instrucciones De Uso

DO NOT spray hairspray while the appliance is
switched on. There is a risk of fire.
Warning
DESCRIPTION OF APPLIANCE AND ACCESSORIES [FIG. Z]
Look at Figure [Z] in the illustration section to check the content of the packaging. All figures are
found in the inside pages of the cover.
1. Power cable
2. Operating button (0/1/2)
3. Operating LED
For the appliance features, refer to the external packaging.
To be used only with the accessories supplied.
The quick understanding of the modes of use of the hair brush will allow establishing the exact
application time for obtaining the desired effect.
• Ensure the hair is dry, clean and without any trace of hairspray, hair mousse or gel.
• Comb the hair ensuring there are no knots.
• Start straightening from the nape of the neck, proceed on the sides and finish on the forehead.
• During use, when the brush heats and cools, position the appliance on a smooth and heat
resistant surface.
• While straightening, be careful not to near the brush too much to the sensitive parts of the
face, ears, neck or head.
• Leave the brush cool down completely when finished, before putting it away.
ATTENTION! After having finished using the hair brush, ensure it has
completely cooled down before putting it away. Never wrap the power supply
cord around the appliance.
PREPARING THE HAIR
• Wash hair as normal and comb removing knots.
• Dry the hair and brush from the roots to the ends.
USER INSTRUCTIONS
• Connect the plug (1) to the mains.
• Switch the brush from the operating button (2): position 1, the brush is on medium speed;
position 2, the brush is on high speed.
• The brush is ready to be used when the operating LED (3) stops flashing.
• Wait a few minutes for maximum performance and the desired style to be achieved.
Steps for optimal results:
1. Wrap a lock of hair around the barrel of the brush (5), which should be of the same width.
2. Select the rotation key (4) and gently accompany the brush downwards.
3. To improve the shine of the lock hold the rotation button (4) and let the silicone bristles
gently caress the end part of the lock.
• Depending on the desired effect and the side being treated, move the rotation button
to the right or the left. For more information and/or suggestions see the Styling guides.
• Once the hair is styled, switch off the appliance from the button (2) and disconnect the
brush from the socket.
Note: it is possible that steam is emitted while the brush is used; this is excess humidity
in the hair that evaporates.
• Switch off the appliance by pressing the button (2) and disconnect the plug (1) from the
socket.
• Wait for the barrel (5) to cool down.
• Clean the surface of the brush with a soft damp cloth.

SYMBOLS

General prohibition

GENERAL INSTRUCTIONS

4. Rotation button (right/left)
5. Hot barrel with silicone bristles
6. Technical data

USEFUL ADVICE

USE

CLEANING

6
Class II appliance