Maintenance And Cleaning; Storage; Disposal - Imetec M2902 Instrucciones De Uso

the lock starting from the largest end and finishing at the thinnest
end.
• Hold in place for a few seconds
• Release it, unwinding the lock in the opposite direction
EN
• The appliance is equipped with self-switch-off function after not
being used for 60 minutes. The operating LED (3) will flash like
this to tell you that the product is in stand-by mode. To reactivate
the product switch it off from the operation button (4). Wait a few
seconds and switch it back on.
o n .

MAINTENANCE AND CLEANING

• Switch off the appliance by pressing the button (4) and disconnect
the plug (5) from the socket.
• Wait for the barrel (2) to cool down.
• Clean the surface of the barrel (2) and the handle with a soft and
damp cloth.
•
The packaging of the appliance is made of recyclable
materials. Dispose of it in accordance with the environmental
protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE), the crossed bin symbol on
WARNING! Always disconnect the
appliance from the mains supply
before cleaning
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.

STORAGE

WARNING! Wait for the appliance to
cool completely before storing it.
WARNING! DO NOT wrap the supply
cord around the appliance.

DISPOSAL

or
14
performing