Preparing The Ice Maker For Long Storage; Cleaning And Maintenance - Franklin Chef FIM200 Manual Del Usuario

·
You may hear air being forced over the condenser by the condenser fan.
·
During the Harvest cycle, you may hear the sound of ice cubes falling into the ice storage
bin.
Preparing the Ice Cube Machine for Long Storage
If the ice cube machine will not be used for a long time, or it is to be moved to another place, it
will be necessary to drain the system of water.
1. Shut off the water supply at the main water source.
2. Disconnect the water supply line from the water inlet.
3. Shut off the power supply at the main electrical power source.
4. Screw off the water tank screw nut and drain out water completely, then tighten the nut after
finishing. Dry the tank.
5. Remove the ice from the ice storage bin. Dry the bin.
6. Leave the door open to allow for circulation and to prevent mold and mildew.
7. Leave the water supply line and power cord disconnected until ready to reuse.
IMPORTANT:
Do not touch the power plug when your hands are wet.
Never unplug the unit by pulling on the cord.
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
The maintenance intervals listed are based on normal conditions. You may want to shorten the
intervals if you have pets or there are other special considerations.
What shouldn t be done
Never keep anything in the ice storage bin other than ice: objects like wine and beer bottles are
not only unsanitary, but the labels may slip off and plug up the drain.
What should be kept clean
There are 4 things to keep clean:
1. The exterior
2. The interior
3. Water distribution tube
4. The ice-making system

Cleaning and Maintenance

14