Franklin Chef FIM200 Manual Del Usuario página 20

will restart and return to the ice-making mode.
2. Ice Making (green) LED: Ice Making indicator light
When this LED is on, the unit is working in the ice-making mode. When the green LED is
flashing, the unit is working in the ice-making mode but approaching the ice harvest mode.
3. Ice Harvest (yellow) LED: Ice Harvest indicator light
When this LED is on, the unit is working in the ice harvest mode controlled by the bin full
probe.
4. I. S. Adjust screw: Ice size adjustment
For service only. Adjustment of this screw by unqualified persons can damage the machine s
controls.
5. Power switch
This is the main switch. When it is turned on, the unit goes into Stand-by mode for about 3
minutes, with all LEDs on, then starts to make ice cubes automatically, switching between
ice-making and ice harvest modes.
6. CLEAN button
While the unit is in Stand-by mode (all LEDs on steady), you can press CLEAN to start the
Automatic Clean procedure. The green and yellow LEDs will flash together.
NOTE: When you finish working with the control panel, close the cover.
IMPORTANT:
·
Avoid letting water contact the control box.
·
When you finish working with the control panel, close the cover.
19