Cleaning Instructions; Technical Specifications - Berkel minivac Manual Del Usuario

Máquina para envasado en vacío
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
IMPORTANT: Always unplug the appliance before
cleaning the MINIVAC.
• Carefully wash your hands before proceeding to
clean the appliance and its accessories.
• Both before and after use, clean the exposed
surfaces of the MINIVAC using a sponge mois-
tened with a mild, non-abrasive and solvent-free
dishwashing detergent. If any liquids accidentally
get inside the appliance, do not connect it to the
mains electricity supply and do not use it; contact
your nearest dealer or authorised service centre.
• The appliance is provided with a lower part (12)
which is entirely removable and washable also
on the dishwasher top rack (fig. S). Before wash-
ing the lower part, remove both gasket (9) (fig.
T) and sealing gasket (10) (fig. U). Clean both
gaskets using a sponge moistened with a mild
Model:
09-8799-5000
Voltage
230V~50Hz140W
Marked
Dimensions
39 (L) x 15 (D) x 8 (H) cm
Weight
2.3 kg
Disposal: In conformity with Directive 2012/19/EC, the symbol shown on the appliance to be
disposed of indicates that this is considered as waste and must therefore undergo "sorted waste
collection".
The user must therefore take (or have taken) the above waste to a pre-sorted waste collection
centreset up by the local authorities, or else give it back to the dealer when purchasing a new
appliance of the same type. Pre-sorted waste collection and the subsequent treatment, recovery
and disposal operations favour the production of appliances made of recycled materials and limit
the negative effects of any incorrect waste management on the environment and public health.
The unlawful disposal of the product by the user could result in administrative fines as provided by
the laws transposing Directive 2012/19/EC of the European member state in which the product is
disposed of.

CLEANING INSTRUCTIONS

TECHNICAL SPECIFICATIONS

washing up liquid and leave them to completely
dry before positioning them again.
Once cleaning and drying are over, carefully fit
both gaskets back in their places. Then reinsert
the lower part (12) in the port provided on the lid
(4).
• For information on how to clean MINIVAC acces-
sories (containers, caps, jars etc.), see the instruc-
tions included in the accessory kit.
Electromagnetic compatibility
The Mod. 09-8799-5000 has been engineered to
meet current electromagnetic compatibility require-
ments. However if you suspect that the appliance is
interfering with the operation of your TV, radio or
other electrical unit, try relocating the appliance until
the interference ceases. Alternatively try plugging
the appliance into a different power socket.
20

Publicidad

Tabla de contenido
loading

Tabla de contenido