Hazards Deriving From The Presence Of Heating Elements (Sealing Bars); Machine Maintenance, Service And Repairs; Modifying The Appliance; Fire Prevention - Berkel BV 400/25 Manual De Uso Y Mantenimento

2.4.7 HaZardS dErIvINg froM THE PrESENCE of HEaTINg ElEMENTS (SEalINg
BaRS)
daNgEr!
• Risk of scalding: do not touch the sealing bar at the end of the work cycle.
2.4.8 MaChINe MaINTeNaNCe, SeRvICe aND RePaIRS
daNgEr!
• Remove the plug from the socket before each intervention.
• Perform all machine maintenance and servicing as scheduled.
• Any damage must only be repaired by qualified personnel.

2.4.9 ModIfyINg THE aPPlIaNCE

daNgEr!
• Do not alter the machine in any way without approval from the manufacturer.
• Immediately replace all deteriorated, worn or damaged parts (qualified personnel must replace these parts).
• Only original spare parts are to be used.

2.4.10 fIrE PrEvENTIoN

daNgEr!
• Keep the vents free from obstacles (at least 10 cm away from any surrounding obstacle).
• Do not place the machine close to flammable products.
daNgEr!
• Risk of burns: ventilate the environment if alcohol-based or flammable disinfectants are used. Keep
open flames away from the machine! Do not smoke!

2.4.11 ClEaNINg aNd dISPoSINg of THE MaCHINE

aTTENTIoN!
• Clean the machine regularly, following the instructions in this manual.
• Use and handle detergents according to the manufacturer's instructions.
• Demolish and dispose of the machine, its components and detergents used to clean the appliance, in com-
pliance with applicable Standards.

2.5 SafETy dEvICES oN THE MaCHINE

2.5.1 NoTES oN SafETy dEvICES

• Before every appliance start-up, check that all the protection and safety devices are present, efficient and
functional. The machine must not be used if one or more safety device is missing or damaged.
• Only qualified and trained personnel must perform maintenance and/or repairs or replace safety devices.
• The safety devices must not be excluded or disabled.
Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60 Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 - BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62
11