Hansgrohe AXOR Instrucciones De Montaje página 12

English
Install the safety set.
9
Install the thermostatic mixer sleeve so that the index-
ing mark is at the 1:00 position.
Install the volume control sleeve.
Install the escutcheon.
Lubricate the adapter stems with a small amount of
10
white plumber's grease (1).
Install the handle adapters and screws (). Tighten
the screws using a  mm Allen wrench.
1

3 mm
Install the volume control handle (1).
11
Tighten the screw using a  mm Allen wrench.
Install the thermostatic mixer handle so that the safety
stop override button is at the 1:00 position ().
Tighten the handle screw using a  mm Allen wrench.
1

2 mm
1