Technical Information; Installation Considerations - Hansgrohe AXOR Instrucciones De Montaje

Ocultar thumbs Ver también para AXOR:
Tabla de contenido

Publicidad

2⅛"-3¼"
⅝"
¾"
2⅞"-4"

English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
This trim is for use with iBox Universal Plus model
01850181 (not included).
To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 10°F. In Massachusetts, the maximum out-
put temperature can be no higher than 11° F.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
8 GPM@ 44 PSI

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bouroullec 19706001

Tabla de contenido