Publicidad
English
TO REMOVE/REPLACE CHINSTRAP COVERS
To remove the chinstrap covers, first remove the earcups as per previous
instructions.
The chinstrap cover is secured to its base plate over the chinstrap anchor
by the tab. Push tab upward to release it from the base plate. Slide the
cover off the strap.
Note the right and left, inside and outside of the chinstrap covers for
replacement.
To wash the chinstrap covers, put them into lukewarm water with small
amount of laundry soap or your own shampoo and wash gently by hand.
Rinse well with fresh water and wipe off with a soft cloth. Dry them in the
shade at ambient temperature.
Left chinstrap cover (D-ring side)
Right chinstrap cover (long side)
WARNING: Never use petrol, thinner, benzene or any other solvents.
8
Publicidad
Capítulos
