Controlling The Audio Device - Avrcp - Sony DR-BT101 Manual De Instrucciones

To adjust the volume
Press the VOL+/– button while
listening to music to adjust the volume.
Tips
 Depending on the connected device, it
may be necessary to adjust the volume on
the connected device as well.
 Volume for calling and listening to music
can be adjusted independently. Even if you
change the volume while calling, the
volume for music playback does not
change.
To stop use
1
Terminate the Bluetooth
connection by operating the
Bluetooth device.
2
Press and hold the POWER
button for about 2 seconds.
The indicator (blue) and indicator
(red) light up together, and the unit
turns off.
Tip
When you finish playing music, the
Bluetooth connection may terminate
automatically, depending on the Bluetooth
device.
Controlling the audio
device – AVRCP
If the Bluetooth audio device connected
with this unit supports AVRCP (Audio
Video Remote Control Profile), you
can control by using the unit buttons.
Refer to the operating instructions
supplied with the Bluetooth device on
how to operate it.
Note
Operation of the Bluetooth connecting device
by this unit will vary depending on its
specification.
Status: In stop or pause mode
Short Press
 
/ 
 Starts playback*
 Stop
 Skip to next/previous
 Fast-forward/Fast-rewind*
Status: In play mode
Short Press
 
/ 
 Pause*
1
 Stop
 Skip to next/previous
 Fast-forward/Fast-rewind*
* You may need to press the button twice
1
depending on the Bluetooth device.
* Some Bluetooth devices may not operate.
2
Note
You cannot adjust the volume of the
Bluetooth device by the unit volume buttons.
Long Press


1
2
Long Press


2
Continued
15
US