Cleaning And Maintenance; Technical Specifications - HQ-Power VPA2100MN Manual Del Usuario

c. Balanced / Unbalanced Input Connection
If an unbalanced input signal is to be connected using an XLR plug, a wire bridge must be inserted
between PIN1 and PIN3 (see fig. on the left). For an unbalanced signal output, a 6.35mm mono jack
plug can also be used.
REMARK: This amplifier will go into safety mode and switch off when overheated. When this happens, let the
amplifier cool down. The amplifier will be ready to use once the thermal protection is back to its ideal
temperature. This can take as much as 45 minutes.

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing and fixations should not be deformed, modified or tampered.
3. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts except for the fuse.
7. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power Supply
Output Power (stereo)
Input connections
LED indication
Cooling control
Speaker connections
Fuse
Total Weight
Dimensions
Max. Ambient Temperature
The information in this manual is subject to change without prior notice.
VPA2100MN_v2
Both amplifier channels feature a balanced XLR female socket as well as a balanced
6.35mm phone jack socket.
Input cables must be screened!
max. 230VAC/50Hz
2 x 60Wrms/4Ω
2 x 50Wrms/8Ω
balanced XLR and phone jack
SIGNAL, CLIP, POWER
automatic
SCREW, BANANA PLUG
F 3.15A 250VAC (5 x 20mm) ( order code
FF3N)
7.4kg
482 x 240 x 95mm
45°C
5 VELLEMAN