Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Place the appliance on a fl at surface.
•
Remove the container from the base.
•
Remove the lid and make sure the mixer/milk frother insert is inside the container.
•
Fill the container with the recommended amount of milk, put back the lid and the
container inside the base.
Note: For better froth, use milk straight from the refrigerator (approx. 3°-5°C).
To prevent the milk from spilling after frothing, the maximum recommended amount of milk
(150ml) must not exceed the line mark MAX FROTH; this is because when frothed, milk
increases its initial volume.
•
Insert the plug in a power socket. The appliance will beep.
•
Press the button B; the other buttons go off . The milk frother will start rotating and
frothing the milk. When the required frothing is reached, the milk frother insert stops; the
appliance beeps and all the buttons light up.
Note: The cycle can be stopped in advance by pressing the button once. Do not remove the
milk container during operation.
•
When the appliance stops, remove the container from the base and pour the cold
frothed milk (Fig.2).
•
Always switch the appliance off by disconnecting it from the mains after use.
Note: It is advisable to clean the appliance of any milk residues after every use, to
avoid risks to health and prevent malfunctioning.
•
Place the appliance on a fl at surface.
•
Remove the container from the base.
•
Remove the lid and make sure the mixer/milk frother insert is inside the container.
•
Fill the container with the recommended amount of milk, put back the lid and the
container inside the base.
Note: The recommended maximum amount of milk (250ml) must not exceed the line marked
MAX MILK.
•
Insert the plug in a power socket. The appliance will beep.
•
Press the button C; the other buttons go off . The milk frother insert will start rotating
slowly. When the required temperature is reached, the milk frother insert stops; the
appliance beeps and all the buttons light up.
Note: The cycle can be stopped in advance by pressing the button once. Do not remove the
milk container during operation.
•
When the appliance stops, remove the container from the base and pour the hot milk
(Fig.2).
•
Always switch the appliance off by disconnecting it from the mains after use.
Note: It is advisable to clean the appliance of any milk residues after every use,
to avoid risks to health and prevent malfunctioning.
10
English
Frothing milk without heating it
Heating milk without frothing it
Publicidad
Tabla de contenido
