Technical Specifications - Bushnell PRIME SP164850B Manual De Instrucciones

CLEANING AND GENERAL CARE
The lenses of your Bushnell Prime spotting scope are fully multi-coated for highest light transmission. As with any multi-
coated optics, special care must be taken in cleaning the lenses. Follow these tips for proper lens cleaning:
• Blow away any dust or debris on the lens (or use a soft lens brush).
• To remove dirt or finger prints, clean with the supplied micro-fiber cloth rubbing in a circular motion. Use of a coarse
cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included
washable microfiber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to
provide a slight amount of moisture, then gently rub the lens with the microfiber cloth.
• For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol
may be used. Always apply the fluid to the cleaning cloth – never directly on the lens.
Never disassemble your spotting scope. Irreparable damage can result from unauthorized service attempts, which also void
the warranty.

Technical Specifications

SP164850B 16x-48x
SP206065B 20x-60x
SP206065AB 20x-60x
All Models: Fully Multi-coated optics, with EXO Barrier™ on exterior lens surfaces.
4
50 MM Straight 120 ft /40m @16x
65 MM Straight 100 ft /33m @20x
65 MM 45 103 ft /31m @20x
o
3.1/1.0
60 ft/20m @48x
3.25/1.0
50 ft/17m @60x
3.25/1.0
50 ft/16m @60x
16.5 14 12.8/325
16.0 20 14.6/371
16.5 20 14.5/368
32.7 / 927
38.1 / 1080
38.1 / 1080