Velleman MVR2 Manual Del Usuario página 5

• Press and hold the menu button [11] to enter the setup menu.
• To go to the next menu entry, press the next button [7]. To open the
menu item, press the play button [8]. To change the setting, press the
'+'- [4] or '-' button [5]. Press the play button [8] again to save the
current setting. To exit the setup menu, press the record button [3] or
wait a few seconds.
• Refer to the table below for the menu structure. The '#' indicates the
number of presses on the menu button [11]; [N] and [J] are shown on
the display.
# [N] [J]
1 set dir set directory A, B or C (see [Q])
2 set time set date and time
3 rec mode set record mode (type, see [B], [O], [P])
4 vor sense set VOR sensitivity 01~05
5 set eq select pre-set balance (see [K]):
6 set rep set repeat to none, one or all (see [A])
7 see space show the available recording time for the current record mode
♣
VOR: Voice-Operated Recording, recording starts when a minimum sound level
00 (01/12/2008)
# record type max. time
01 SP
02 LP
03 VOR/SP
04 VOR/LP
#
01
02
03
04
05
is detected and pauses when sound level drops below minimum
MVR2
setting
2,080min.
8,320min.
2,080min.
8,320min.
[K]
DBB heavy bass
JAZZ
DISCO
CLSS
5
♣
:
remarks
WAV format without VOR
ACT format without VOR
WAV format with VOR
ACT format with VOR
remarks
natural
jazz
disco
classical
®
Velleman