Safety Instructions And Warnings; How To Remove Your Baby Seat; Maintenance; Warranty - Polisport GROOVY FF Instrucciones De Funcionamiento

SAFETY INSTRUCTIONS AND WARNINGS

• The rider must be at least 16 years of age; Check the laws and national
regulations pertaining to this.
• This baby seat is only suitable for carrying children with a maximum
weight of 22 Kg (and children with recommended ages ranging from 9
months to 5 years of age - with the weight as the decisive variable.) Check
the child's weight before using the baby seat. Under no circumstances
should you use the baby seat to transport a child with a weight above
the permissible limit.
• Do not carry a child less than 9 months of age, in this baby seat. To be
a passenger, the child must be able to sit up straight with the head held
upright while wearing a bicycle helmet. A doctor should be consulted if
the child's growth is questionable.
• Check if all parts of the bicycle function correctly with the baby seat
mounted.
• Do not install this baby seat on a racing bicycle (drop handlebar).
• Secure the child on baby seat ensuring that all the safety belts and straps
applied firmly but not so tight as to cause discomfort to the child.
• Make sure the seat stays slightly reclined towards the back and not
towards the front, to avoid the child from slipping.
• The baby seat must never be used before adjusting the safety belt.
• Do not allow any part of the child's body or clothing, shoelaces, baby seat
belts, etc. to come in contact with moving parts of the bicycle because can
be harmful to the child or cause accidents.
• A wheel protector is recommended to prevent the child from inserting
its feet or hands between the spokes. The use of protection underneath
the saddle or the use of a saddle with internal springs is mandatory.
Make certain that the child is not able to hinder the brakes, thus avoiding
accidents. These adjustments should be revised with child´s growth.
• Dress the child with proper clothes according to weather conditions and
use an appropriate helmet.
• The children in seats need to be more warmly clothed than riders of
cycles and should be protected from rain.
• When the baby seat is not in use, fasten the waist buckle of the security
harness to prevent the straps from dangling and entering in contact with
some turning part of the bicycle as wheels, brakes, etc. as these may be a
hazard to the cyclist.
WARNING: Additional security devices shall always be fastened.
WARNING: Do not attach additional luggage to the child carrier. If you
carry additional luggage its weight must not exceed the bicycle's carrying
capacity and it must be carried in front of the rider.
WARNING: Do not modify the seat.
WARNING: The cycle may behave differently with a child in the seat
particularly with regard to balance, steering and braking.
WARNING: Never leave the cycle parked with a child in the seat unattended.
WARNING: Remove the seat when transporting the bicycle by car (outside
the car). Air turbulence might damage the seat or loosen its fastenings to
the bicycle, which could lead to an accident.
WARNING: Is extremely important to make sure that on the final of the
assembly you hand tight the screws of the mounting block (I) to make sure
that the metallic bracket (H) is totally secured and tighten.
WARNING: Do not use the seat if any part is broken. Check the screws
regularly and replace any when required.
• The position of the baby seat must be adjusted so that the bicycle rider
does not touch the baby seat with the feet when in motion.
• The weight of the rider and the child carried must never be more than
the maximum load allowed for the bicycle. Check the bicycle instructions
manual of the bicycle supplier to make sure if the bicycle supports this
additional load.
• You must cover any sharp or pointy object of the bicycle that may be
reached by the child.
• The seat and cushion can get hot if under the sun for a long time. Make
sure that they aren't too hot before seating the child.
• Check that the seat functions correctly when mounted.
• Check the laws and regulations in your country, related to carrying
children in seats attached to cycles in force.
GROOVY_MANUAL_3PONTOS.indd 5
• Carry only children that are able to sit unaided for a longer period of time,
at least as long as the intended cycle journey.
• It´s very important to adjust correctly the seat and its component parts
for optimum comfort and safety of the child. It´s also important that the
seat does not slope forwards, so that the child does not tend to slide out of
it. It´s also important that the backrest slope backwards slightly.

HOW TO REMOVE YOUR BABY SEAT

Detach the safety-belt (C) in order to remove the baby carrier. Then press
the locking button (I3) on the mounting block (I) and at the same time pull
the metallic bracket (H) up and back as shown in the image.

MAINTENANCE

To keep the baby seat in good working conditions and to prevent
accidents we recommend the following:
• Check regularly the mounting system of the seat to the bicycle in order
to make sure it is in perfect condition.
• Check all the components to see if they work properly. Do not use the
seat if any of the components is damaged. Damaged components must
be substituted. In order to replace them you need to go to bicycle store,
that is also an authorized POLISPORT dealer in order to get the correct
components for replacement. You can find them on the website:
www.polisport.com.
• If you have suffered an accident with your bicycle and safety seat, we
advise you to get a new safety seat. Even if there is no visible damage
to the seat.
• Clean the seat with soap and water (do not use abrasive, corrosive or
toxic products).

WARRANTY

2-YEAR WARRANTY: All mechanical components against manufacturer
defects only. Register your seat at www.polisport.com.
WARRANTY CLAIMS
To obtain warranty service, you must have your original sales receipt. Items
returned without a sales receipt will assume that the warranty begins
on the date of manufacture. All warranties will be void if the product is
damaged due to user crash, abuse, system modification, or used in any
way not intended as described in this operating manual.
* The specifications and design are subject to change without notice.
Please contact Polisport for any questions.
FR
PORTE BÉBÉ POUR BICYCLETTE
FIXATION AU CADRE
Pour vous promener à vélo avec votre enfant en toute sécurité, nous avons
élaboré la solution parfaite, adaptable à tout type de cycles.
Nos sièges ergonomiques pour enfants ont tous été conçus pour assurer
avant tout la sécurité et le confort de vos enfants.
Ce manuel contient des instructions sur l'installation du siège bébé.
Veuillez lire attentivement le manuel pour installer correctement et de
manière sécurisée le siège bébé.
CARACTÉRISTIQUES TECHNIQUES
• Le siège ne peut être installé sur des vélos disposant d'amortisseurs.
• Le siège pour bébé peut s'installer sur des vélos à cadre rond, entre 28
et 40 mm de diamètre.
• Le porte-bébé peut être monté sur des vélos avec roues de diamètres
entre 26" et 28".
5
www.polisport.com | |
3/24/16 18:12