Installation And Maintenance Instructions - English; Notes On These Installation And Maintenance Instructions; Associated Documents; Obligations Of The Operator - hafele WT 210 Instrucciones De Montaje

Installation and maintenance instructions - English

1. Notes on these
installation and maintenance instructions
1.1 Contents and
target group of
the installation
and maintenance
instructions
1.2 Obligations of
the installer
1.3 Obligations of
the operator
1.4 Exclusion of
liability
24
These installation and maintenance instructions aid in the secure mounting and
installation of the WT 210 / WT 210 BLE wall terminal as a component of an access
control system. The instructions are a constituent of the system, and must be kept
in the immediate vicinity of the system and be accessible to the personnel at all
times.
The personnel must read and understand these instructions carefully before starting
any work. A basic requirement for safe work is the observance of all safety notes
and handling indications specified in these instructions.
Furthermore, the local health and safety regulations and general
safety regulations for the area of application of the system apply.

Associated documents

In addition to these installation and maintenance instructions, the following
documents are valid for the access control system:
• Supplier documentation of the power supply
• Dialock 2.0 user manual or updated version
It is essential to pay attention to these installation and maintenance instructions in
order to install the product successfully and safely. Please pay attention to all of
the specified installation steps, instructions and notes!
These installation and maintenance instructions are intended for:
• the operator of the product
• the installer of the product
In addition to these installation and maintenance instructions, both groups of people
must also have read the separate operating instructions and the DIALOCK
software manual before handling the product.
In case of use in software-controlled systems, separate instructions are enclosed
with the relevant system components.
The installer has the following obligations:
• All notes and specifications in the installation and maintenance instructions must
be complied with. The installation steps must not be deviated from or varied.
• Only the supplied original parts must be installed.
• The installation and maintenance instructions must be handed to the operator
after installation has taken place.
The operator has the following obligations:
• The installation requirements must be adhered to.
• The product may only be installed and started up by qualified experts.
• The installation and maintenance instructions must be kept until the product is
disposed of, and handed to the new operator in the event of a change of
operator.
No liability is accepted for injuries or damage that is attributable to one or more of
the following reasons:
• abuse of the equipment
• omission of the emergency opening facility
• failure to read and/or follow the instructions
• inadequately qualified / instructed personnel,
• negligent handling of the product