Instructions; Safety; Safety Notes And Symbols In These Instructions - hafele WT 210 Instrucciones De Montaje

2. Safety

2.1 Safety notes and
symbols in these

instructions

Safety notes
Safety notes in these instructions follow a uniform structure. They are introduced by
a signal word that indicates the extent of the hazard. This is followed by the source
of the danger and measures to avoid them.
The following risk levels are distinguished:
DANGER
This combination of symbol and signal word indicates an immediately
dangerous situation causing death or serious injury if not avoided.
WARNING
This combination of symbol and signal word indicates a potentially
dangerous situation that may cause death or serious injury if not avoided.
CAUTION
This combination of symbol and signal word indicates a potentially
dangerous situation that may cause minor or light injury if not avoided.
NOTE
The note is used to point out dangerous situations which could lead
to potential property damage/consequential damage to the product or
damage to the environment. Notes are also used to provide important
additional information.
Safety notes in handling indications
Safety notes may relate to certain individual handling indications. Such safety notes
are incorporated into the handling indication as to not interrupt the flow of reading
when carrying out the action. The signal words described above are used.
Examples
1. Loosen screws.
2. Connect lead.
CAUTION
Risk of leads being trapped by the cover!
• Watch the position of the lead. Close cover carefully.
3. Tighten screws.
25