hafele WT 210 Instrucciones De Montaje página 38

38
3. Connect the connection leads to the clips (fig. 10/1) of the reader.
1
Fig. 10: Terminal clamps on the rear
4. Screw cover to rear of WT 210 / WT 210 BLE (fig. 11/1). Lead out the leads to the
padded cable guides at the side (fig. 11/2).
Fig. 11: Rear of WT 210 / WT 210 BLE with lead
NOTE
Risk of damage to the leads!
The connection leads can be damaged in the event of incorrect installation.
• Carefully push the reader and lead into the switch box.
• Ensure that the leads are not trapped.
+
-
-