Publicidad
Idiomas disponibles
Idiomas disponibles
6. Residue barrel 7. Main machine 8. Juicer jug
※ Performances
1.For the juicer with large diameter, entire apple or pear can be put in for juicing, no cutting apart
needed, easy and quick.
2.Design is fine, simple, and beautiful, with combined structure, easy to operate and clean.
3.High speed electric motor with overheating protection is adopted, high efficiency, time saving,
energy saving, high service life of the motor.
4.Safety lock unit for switching is specially designed, in order to make sure safety and reliability
in use.
※ Attention before using
1.This machine is set with safety unit, when the handle does not fasten the cover or the cutter seat
is not fastened, the motor cannot turn, so as to ensure safety for the user.
2.When disassembling or assembling the juicer, press the upper of feed port of the cover with your
hand, then force the handle to slide in or out of cover slot.
3.When disassembling juicing net, first remove the cover and residue barrel, then turn the middle
ring up to 30 degrees by holding juicing nozzle with your hand, and take up, the juicing net will
automatically leave the rotor.
4.In order to avoid damage, before using, first check power supply for compliance with rated
voltage .
5.Clean all parts able to disassemble (refer to the section of "maintenance and cleaning").
6.When assembling, please carefully read the diagram of "name and position of main
components".
7.Please carefully read the "attentions" before using.
※ Juicing
1.Before using, please confirm the button switch of the main machine in stop state, in this way, in
case assembly is not completed, starting the main machine can be avoided, so unnecessary
damage for persons or property avoided.
2.Before juicing, first confirm juicing net and rotor clutched in position, and no hard contact
between juicing net cutter and transparent cover. Put the transparent cover on, put the handle
Publicidad
