dirna Bergstrom bycool DINAMIC 1.1 Instrucciones De Montaje página 29

DINAMIC 1.1
Stick the plastic supports, fixing clamps and
10
secure the pipe, cabling and wastewater pipe
(clean the assembly area).
10
Position the drain valve.
10a
IMPORTANT: The wastewater pipe must not
!
be twisted and must be sloped to allow the
correct discharge of the condensation water.
POSITIONING THE WASTEWATER
YES
Position the cover with the previously removed
11
screws.
CAUTION: Do not forget to connect the
cable clamp for the condenser fan.
PIPE
NO
10
11
29
EN
®