dirna Bergstrom bycool SLIM Manual Del Usuario página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
SLIM
EN
Thank you for acquiring and trusting our products range. Slim is an Air Conditioning
equipment designed and made by Dirna Bergstrom to be used with vehicle´s engine
off, during resting periods under the shade and/or at night. The only maintenance that is
required is a periodical cleaning of the condenser, at least once a year (1).
Slim is designed with the most advanced technology to achieve an efficient output, a
reduction in energy expenses and CO
characteristics which make it unique on the market of Air Conditioning for vehicles.
If the temperature inside your vehicle cabin is too high for you to rest, cool down cabin
with vehicle Air Conditioning during a few minutes, then connect Slim to maintain comfort
temperature.
If you have any doubt, please consult your dealer or directly Dirna Bergstrom
Do not forget to ask your dealer for your warranty card.
!
!
(1) To carry out this operation, it is necessary to dismantle upper plastic cover of equipment (9
sheet thread screws) and blow using compressed air. We advise this operation should be carried
out by a Service authorised by Dirna Bergstrom
RECOMMENDATION:
For optimal operation of the unit, it is recommended
to start it up occasionally during the winter months in
order to prevent the joints from deteriorating.
NOTE:
If, during assembly, the unit becomes slanted or the
cabin drops with the unit mounted, wait for at least
60 minutes from the moment the unit is horizontal
before starting up.
emissions to the atmosphere. These are the
2
10
®

Publicidad

Tabla de contenido
loading

Tabla de contenido