Operation - Innowater SMC Serie Manual Del Usuario

6. OPERATION

The chlorinator and its different menus are controlled with a four key keypad. The
keys Λ and MENU also have a secondary function (SHOCK and ON/OFF
respectively) accessible by holding down the key for 2 seconds.
NOTE: At some points of activity or during a change of function the keyboard may
seem as it is not responding immediately. This is completely normal. Just wait a few
seconds for the task to be completed and the display will respond.
6.1 ON/OFF
OFF
The ON/OFF function (MENU key + 2 seconds) turns the chlorinator alternatively
ON and OFF. Once switched on, the Production Screen will appear:
Production: 70%
Salt:
This screen indicates the current production rate and the existing salt level in the
water. It may take a few seconds for the salt level to appear. If you are on a different
screen you can always come back to the production screen by pressing the MENU
button repeatedly.
To increase or decrease the chlorine production rate press the
chlorinator modules the production by varying the operating time in periods of 10
minutes. At 100% the chlorinator works constantly.
You will soon get to know the needs of your pool which will depend on the different
conditions (number of users, temperature, etc.) allowing you to anticipate in the
production setting. In general, to enjoy the benefits of salt water chlorination, we
recommend setting the minimum production rate that produces a crystal clear water
in your pool. Avoid chlorinating during high sunshine hours because chlorine will
quickly disappear due to the UV radiation and won't have the time to disinfect your
pool thoroughly. We recommend to program the chlorinator during the night or at
low sunshine hours.
Shock Mode
The shock mode allows you to apply a shock treatment (chlorinator at 100%) for a
selectable period of time with automatic return to the previous production rate once
the shock period has ended. This feature is useful if the chlorine level has fallen
suddenly for some reason and you want to recover it quickly.
To activate the shock mode, go to the Production Screen and press
few seconds. The following screen will appear:
OK
23
Λ V .
or arrows The
Λ
(SHOCK) for a
SMC
E
N
G
L
I
S
H